Construction Chemicals

CHORFIX EPOKSİ ANKRAJ HARCI 2K

CHORFIX EPOKSİ ANKRAJ HARCI 2K, solvent içermeyen tiksotropik iki; bileşenli epoksi reçine esaslı yapısal yapıştırma ve tamir harcıdır.; Bayındırlık Bak. Poz No: 04.613/8-e

CHORFIX EPOKSİ HARCI 3K

Solvent içermeyen, düzgün tane dağılımlı, silis ve agrega karışımından oluşan; üç bileşenli tiksotropik harçtır. Karıştırıldıktan sonra çok amaçlı tamir harcı; olarak kullanılır. Bayındırlık POZ No:04.613/8-b

CSR 1111

Epoxy resin with special additives is composed of hardener and special silica particles. In each; set, there are two packs weighed at the factory; these are prepared at necessary proportions to be; mixed and used on site. It is used for removing by filling any mineral based surface irregularities,; whether small or large, It does not leak or crack and fills any thickness at one application. It may also; be used on vertical surfaces.

CSR 1141

Özel katkılı epoksi reçine ve sertleştirici karışımından oluşmuş iki bileşenli bir; epoksi doğaltaş dolgu jeli’dir. Her bir set’te, fabrikada tartılmış iki ambalaj; bulunur. Doğal taşın rengine uygun olarak imal edilir veya kullanıldığı ortamda; renklendirici sıvı renk pastaları ile istenilen renk hazırlanabilir.

CSR 1211

This is a flexible low density leveling paste with high capacity sound, heat insulation, vibration; absorption flexibility composed of two components consisting of a mixture of epoxy resin with; special additives and hardener, developed to be used in leveling of surfaces under pressure of; normal rated loads, for leveling welding traces on metal sheet surfaces and metal sheets with; irregular (rough) surfaces, in conformity with floor movements on aluminum. It is used especially; in correcting surface irregularities of aluminum and metal sheets.

CSR 1231

It consists of epoxy resin with special additives, a hardener mixture and silica particles. In every; set, there are three packages ( A+B+C ) weighed at the factory; they are prepared at necessary ratios; to be mixed and used on site. It is used in removing by filling all kinds of Mineral based minor and major; surface irregularities. With its self-spreading property, it is filled at once at desired thickness and does; not crack. It is used on dry surfaces. Its natural color is grey. Using colorings in powder or paste state; recommended by our Firm, color adjustments may be made on site in grey shades.

CSR 8031

It is a solvent-free, thixotropic, epoxy based anchor and bond material that; include two components.

CSR 8101

CSR 8101 is a solventless polyester based anchor and bond material that; include two components. It can be easily applied by special mixers.

CSR 8201

CSR 8201 KİMYASAL DÜBEL (Epoksi Akrilat) ; ankraj yapıştırıcıları diğer; mekanik ankraj tekniklerine kıyasla daha geniş spektrumlu avantajlar sunan iki; bileşenli, yüksek kaliteli kimyasal ankraj enjeksiyon sistemidir.

CSR 8221

It is a solvent-free, thixotropic, epoxy based anchor and bond material that; include two components.

CSR 8241

CSR 8241 is thixotropic and non-solvent epoxy based anchor; that include two components. This product has an advantage to; use in closed areas due to its low odor and low flammability. It; can be used on concrete, stone and rock. Also, it is suitable for; wet and underwater usage.

CSR 8321

It is a solvent-free, epoxy based anchor and bond material that include two; components.

CSR 8421

CSR 8421 Epoksi Ankraj Şeffaf 2K (HP), solvent ve dolgu içermeyen iki; bileşenli epoksi reçine esaslı yapısal yapıştırma ve tamir sıvısıdır.